Temporary Fence Panels Canada: Answers on Size, Finish, and Ordering

The panel height and width can be selected from several listed sizes, including 6 ft × 9 ft, 6 ft × 9.5 ft, and 6 ft × 10 ft. Custom sizing is also available. Wire diameter options include 3.0 mm, 3.5 mm, 3.8 mm, 4.0 mm, and 4.5 mm, among others. Mesh openings include 50 × 200 mm, 50 × 100 mm, 50 × 150 mm, 75 × 100 mm, and 75 × 150 mm.

For a site layout, first measure the required fence line and access points. Then match the panel width to the layout and check the available space for the fence feet. A buyer ordering for a construction perimeter, event area, or other short-term enclosure should send the required height, width, wire diameter, and mesh opening with the inquiry.

The Canada Temporary Fence Panel can be PVC coated, powder coated, galvanized, or painted. A listed surface finish is galvanized plus powder coating. Color choices include blue, green, red, dark green, and orange. The right finish and color should be selected for the intended site appearance and the buyer’s handling requirements.

The panel is made from welded wire mesh and square pipes. The outside frame is available in 25 × 25 mm or 30 × 30 mm sizes, while the middle frame is available in 20 × 20 mm or 25 × 25 mm sizes. Frame thickness options range from 0.8 mm to 3.0 mm.

Fence feet are listed in sizes including 563 × 89 × 7 mm and 863 × 89 × 8 mm. The self-standing base is intended for convenient assembly, and the panels can be free-standing or anchored to a surface. Top clips connect two panels together. Before ordering, compare the selected base and connection accessories with the ground conditions and the planned fence arrangement.

Yes. The product is intended for situations where a temporary fence is needed for a short period. The panels are designed for quick setup, installation, removal, and transport. The self-standing base avoids drilling or burrowing into the ground, and the fence can accommodate uneven ground.

Picture a temporary perimeter that must be assembled, moved, and removed as work progresses. The buyer should plan the panel sequence, corner locations, access points, feet, and top clips before ordering. Send a layout drawing or a measured fence-line plan when asking for a configuration.

Include the required quantity, panel height and width, wire diameter, mesh opening, outside-frame size, middle-frame size, frame thickness, fence-foot size, surface finish, color, and top-clip requirement. State whether the panels will be free-standing or anchored and describe the ground surface where they will be used.

These details allow the requested configuration to match the site. For a custom order, also provide any required dimensions and the intended use, such as a construction perimeter or event enclosure. The supplier can then review the requested specification and configuration.